Product Introduction: :
The RC-2 rapid-setting product is suitable for use in construction works, building projects, and pavement maintenance.
Advantages :
• Ideal for tack coat applications.
• Can be applied cold and is easy to use, with no need for dilution or heating.
• Compliant with the specifications of the Ministry of Transport as well as American standards.
Uses: :
When RC-2 is used as an adhesive bonding coat, it is applied in the construction and maintenance of pavements as specified in ASTM D2399. It is also used for waterproofing foundations and concrete structures both below and above ground level, as well as for insulating metal and wooden surfaces.
Application Instructions:
RC-2 is applied to asphalt or aggregate surfaces using fixed spraying equipment.
mounted on trucks.
cover :
For the bonding coat, the maximum application rate is 0.25 liters/m². The exact rate depends on the porosity of the asphalt and aggregate surfaces.
Workers should wear protective equipment such as gloves and safety goggles during application.
Precautions :
RC-2 contains volatile solvents and has a low flash point. Caution must be exercised, and adequate ventilation should be ensured in the work area. Open flames and ignition sources should be kept at a safe distance.
Packaging :
RC-2 is supplied in drums, sheets, and in bulk by truckload.
Storage:
It should be stored in a dry, shaded area in its original container. The container should remain covered during use to prevent solvent evaporation.
The product is approved by the Ministry of Transport and Roads.
Product Details
