Specifications:
Super Seal (SK-60) is a fiber-reinforced bituminous emulsion with high waterproofing properties. It is designed to provide a durable bitumen layer that protects most surfaces. This product allows water vapor to escape from the coating layer while simultaneously remaining resistant to water penetration.
Coating and Application:
- For use in tanks and pipes to prevent water leakage.
- For repairing and restoring pavements, filling cracks, and sealing them.
- To achieve cohesion in any area.
- Protection for concrete, both below and above ground surfaces.
- Forms a barrier against moisture.
- Used as a protective layer for SPS and APP products, as well as for metal and wooden roofs.
- This product’s resistance to ultraviolet (UV) rays allows it to be used as a top layer in composite bitumen membrane (rolled) systems.
Features:
- Easy to apply and use.
- Non-flammable – Non-toxic – Non-corrosive.
- Resistant to water, chemicals, and pollutants, and also…
- Environmentally friendly, containing only a small amount of volatile organic compounds (VOCs).
- Stable emulsion.
- High adhesion to clean surfaces.
- Dries to form a solid film.
- High coverage rate.
- Separate container.
- Mineral-saturated product – fiber-reinforced.
Instructions for Use:
- Clean the surface before applying SK-60 by removing dust, flakes, oils, etc., prior to use.
- Moisten the surface and spray it with water before applying SK-60.
- Apply the material using a brush, roller, or spray. It can be diluted with clean water to achieve a consistency that allows easy application.
- For porous surfaces, a primer layer of SK-60 can be applied, diluted with 50% water.
- Then apply a second coat of SK-60 at full strength (100%).
Specifications and Physical Properties:
- Brown chocolate color – turns black after drying
- Viscosity: 20 RPM on a Brookfield viscometer
- Stability and non-evaporation rate at 100°C: 62%.
- Elasticity: 3%
- Chemical Content: 1%
- Water Content: 36%
- Elongation: 300%
- Safe – Non-Toxic – Non-Flammable – Odorless
- Adhesion: Can adhere to clean asphalt surfaces, wood, and metal.
- Can be easily mixed with cement, aggregates, gravel, etc.
- It is a water-based material.
- Stability: Not affected by long-term storage or transportation.
- Drying time: First coat: 30 minutes; main SK-60 latex coating: 2 hours.
- Durability: Resistant to high and low temperatures, from -30°C to 80°C.
Approximate Volume: Packaging: Available in barrels of 20 and 200 liters.
cover Coverage: Each liter covers approximately 1.5 to 2 m².
Health and Safety SK-60 contains tar; therefore, protective clothing, gloves, and eye and face protection should be worn during use.
In case the material comes into contact with the skin, wash with clean water and seek medical advice at the nearest healthcare center.
Product SK-60 Fiber-reinforced, compliant with the specifications of:
ASTM D118, ASTM D3747 (Type I), ASTM D1227 (Type II).